Downloaded from https://www.everyspec.com MIL-STD-31000B source control document in the TDP (reference DID DI-SESS-81010). 5.14.3 Engineering design document number assignment report. An engineering design document number assignment report shall be prepared to identify and describe the use of Government document numbers by the contractor (reference DID DI-SESS-81011). 5.14.4 Proposed critical manufacturing process description. Proposed critical manufacturing process descriptions shall be prepared to describe manufacturing processes, which are critical to meeting the design requirements of the item.
The process shall be approved as critical by the procuring activity cited in the contract as having approval authority before it is designated as mandatory in TDP documents (reference DID DI-SESS-81012). 5.14.5 Engineering drawing tree. The engineering drawing tree shall be prepared to identify the interrelationships of engineering design data and associated lists that comprise the TDP. The drawing tree shall be in a block diagram format that identifies all system, subsystem, and component documents to be delivered as part of the TDP.
The tree shall be structured in top down breakdown order, at the lowest level of assembly (lowest repairable unit) or the lowest component or piece part, as specified in contract. 5.15 TDP metadata. TDP metadata, when required, shall be submitted and delivered in accordance with the contract and TDP Option Selection worksheet. 5.16 Supplementary technical data. TDP supplementary technical data, when required shall be submitted and delivered in accordance with the contract and TDP Option Selection Worksheet. 21