Downloaded from https://www.everyspec.com MIL-STD-31000B 3.1.37.2 Neutral CAD data. CAD data which is derived from the native format and converted into a format which can be imported into other CAD software. Neutral CAD data is created to a widely available national or international standard (e.g. STEP). In general, neutral CAD data cannot serve as master technical data but may serve as either reference or authoritative technical data. 3.1.37.3 Viewable CAD data. CAD data which is derived from the native format and converted into a format which can be displayed by a widely available software and for purposes of defining design intent in a human readable format (e.g. 3Di PDF).
In general, viewable CAD data cannot serve as master technical data but may serve as either reference or authoritative technical data. 3.1.38 Technical data origin: 3.1.38.1 Master technical data. A set of technical data which is the controlling source for any subsequent technical data output. All changes to the technical data must originate on the master technical dataset. There can be only one instance of the master technical data which is typically in the native CAD format and maintained by the current design activity. 3.1.38.2 Derivative technical data. A set of technical data generated from master technical data.
Typically derivative technical data is created to change its format to suit a different purpose. For example converting master, native format data to neutral or viewable data (e.g. STEP, PDF, etc.) so as to allow it to be read by a wider range of software applications. Changes to derivative technical data originate on the master technical dataset. 3.1.39 Technical data validation status: 3.1.39.1 Authoritative technical data. A set of technical data which has been released and validated as adequate and complete for its intended purpose. 3.1.39.2 Reference technical data.
A set of technical data which is provided for information, but is not necessarily validated as accurate, adequate and complete. 3.1.40 Technical Data Package (TDP). The authoritative technical description of an item. This technical description supports the acquisition, production, inspection, engineering, and logistics support of the item. The description defines the required design configuration and/or performance requirements, and procedures required to ensure adequacy of item performance.
It consists of applicable technical data such as models, engineering design data, associated lists, specifications, standards, performance requirements, quality assurance provisions, software documentation and packaging details. 3.1.41 Technical data package data management product. A data product that is used to monitor and control the development and maintenance of the TDP. A TDP data management product contains information about the TDP rather than the item being documented. 3.1.42 Technical data package element (a.k.a. component). A data product that is an actual component of the TDP.
A TDP element provides all or part of the information necessary to define the item being documented by the TDP. All TDP elements taken collectively provide a complete Technical Data Package. 3.1.43 Technical Data Package List (TDPL). An index of all documents contained in a technical data package established at a point in time. TDPLs contain a list of all specifications, engineering design data, (i.e. drawings, models, 3Di viewables, etc.), QAPs, inspection documents, packaging documents, or other documents which comprise the TDP listed by nomenclature, document CAGE code, document number, distribution statement, revision, and date. 9