HOW TO PERFORM THE TIMER OPERATION 5 Press SET button. mark next to a number is switched to light. ” is displayed. The settings so far are effective and the display buttons to the left diagram. 6 Press or button. Press button and “ ” is displayed. Press button and “ ” is displayed. Select either of the above two. J Next setting and Exiting Weekly timer Mode After “ ” is displayed, “ ” is displayed. 1 Press or button. By pressing or button, it is possible to choose the item to set. ” (selecting the next timer operation number for the same day of the week) ” (selecting the next day of the week) Press the RESET button to return to the step 3 display. 7 Press SET button.
” is displayed 2 Press SET button. In case “ ” is selected, “ ” is displayed. Repeat step 3 and onward of Weekly timer setting on page 7. ” (Timer mode ends) ” is selected> 8 Press or button. Set the time. Press the RESET button to return to the step 5 display. In case “ ” is selected, “ ” is displayed. Repeat step 1 and onward of Weekly timer setting on page 7. 9 Press SET button. Time display is switched to light, and is fixed. In case “ ” is selected, timer mode is ended. In case of OFF timer setting, setting process is completed on this step. A “_” mark is lit ( Ж ) under the day of the week which you set and the display appears as the left diagram.
Proceed to “ „ Next setting and Exiting Weekly timer Mode” on the right page. 2 1 In case of ON timer setting, “ ” is displayed, proceed to step 10 . 10 Press or button. Select either “ 11 Press SET button. In case “ ” has been selected, ON timer setting process is completed. A “_” mark is lit ( Ж ) under the day of the week which you set and the display appears as the left diagram. Proceed to “ „ Next setting and Exiting Weekly timer Mode” on the right page. In case “ ” has been selected, “ is displayed; Proceed to step 12. ATTENTION J Display after Weekly timer Modes Setting If you press button while timer mode is operative, timer mode is canceled and The day of the week set is underlined.
The mark is displayed above the current day of the week. 12 Press the temperature setting buttons . Press the or If you do not press any button for several the display will return to the original display. The display of all the timer operation numbers set for the current day is turned on. The mark indicates the next button to increase or decrease by 1°C. Set the temperature of operation starting. or the minutes after entering the timer mode, the timer mode ends and returns to the original The timer operations are executed in order, and the number setting number to be activated, and the set time is displayed. 13 Press SET button. ON timer setting with start-up temperature has been completed.
The temperature display switches from flashing to lighting stably. Press the reset button to return to the display “ If you select a day of the week for which setting display. and time display is turned off when all the timer operations for the current day is completed. have already been mode, all the timer numbers that have been set are displayed. And the details of the timer setting for the number which has “ mark is displayed. You can modify the selected A “_” mark is lit ( Ж ) under the day of the week which you set and the display appears as the left diagram. Proceed to “ „ Next setting and Exiting Weekly timer Mode” on the right page.
In case you set ON timer and OFF timer operating setting by overwriting it. If the same two time are set for ON timer on the same day, the lower number shows preference. at the same time, OFF timer will be effective. 8