HOW TO PERFORM THE TIMER OPERATION ON TIMER MODE WEEKLY TIMER MODE The unit starts to operate at the set time. It is possible to set temperature at which you want to start the operation. One setting results in one operation only. J Selection of Weekly timer mode Up to four times of timer operation (ON timer/OFF timer) are available for each day of the week. Note : Set time every month in Weekly timer mode. 1 Press TIMER button. 2 Press button for three times. [ ] Ж [ ] Ж [ ] Ж [ ] 3 Press SET button. [EXAMPLE] “ ” flashes, ” lights. 4 Press or button.
Set the preferred time to start the operation Set “Hour” If you press or button for a while, “Hour” display is changed by one hour, and stops when you stop pressing. Set “Minute” If you press or button, the display increases or decreases by ten minutes. 5 Press SET button. ON timer has been set. The left display is displayed in the display area. ” (lights) ” (lights) 1 Press TIMER button. 10 8 2 Press button for four times. [ ] Ж [ ] Ж [ ] Ж [ ] Ж [ ] 3 Press SET button. ”is displayed in the display area. 4 Press or button. By pressing or button, it is possible to choose the item to set.
” (for setting the timer) ” (for setting the selected day of the week to holiday) ” (for checking the timer setting and canceling individual settings) 3 2 1 5 4 ATTENTION 3•5 2•4 1 7 6 If you press button while timer mode is operative, timer mode is canceled and the display will return to the original display. If you do not press any button for several minutes after entering the timer mode, the timer mode ends and returns to the original display. 5 Press SET button. The selected mode is fixed. 9 If you press the RESET button, the remote control will return to the previous screen. 6 Press or button.
Press button and “ ” is displayed Press button and “ ” is displayed Select either of the above two. Go to step 7 if temperature is set. Go to step 9 if set temperature is not set. 7 Press SET button. The left display is displayed in the display area. ”(lights) “27°C” (The current set temperature is displayed flashing) ” (lights) 8 Press J WEEKLY TIMER SETTING 1 In the Weekly timer mode, select “ and press SET button confirm. See step 1 to 5 in the above “Selection of Weekly timer mode” ” ( is flashing) ” is displayed in the display area. 2 Press or button. Set the mark above the day of the week to the day to be set for timer setting.
Press and to move to the right and left respectively, and will move flashing. If you press the button when the “ ” marks are displayed on from “MON” to “FRI”, and then “SUN” to “SAT” (every day) with flash, this can be used to apply the same schedule on these days. button to set temperature. If you press button, the display increases or decreases by 1°C. Set temperature at which you want to start the operation. or or Press RESET button to return to “selecting Weekly timer mode screen”, and “ ” is displayed. See the above step 3 . 3 Press SET button. ” mark above the day of the week is switched to light, and is fixed. ” is displayed as the left display. 4 Press or button.
Up to four schedules can be set for each day. Select the timer schedule number you want to set. Set either ON timer or OFF timer for each single operation. (See the left EXAMPLE ). Press button to make the mark next to the number flash and move downwards. Press the button to move the mark upwards. If you press the RESET button, the remote control will return to the previous screen. 9 Press SET button. ON timer is set, and after “ ” is displayed, it returns to step 2 . ” (lights) ” (lights) И ” (lights) ” (lights) Set temperature is displayed only in case it is set. The unit starts to operate at setting time with set temperature. The time display is turned off.
ATTENTION • If you press the button while timer mode is operative, timer mode is canceled and the display will return to the original display. If you do not press any button for several minutes after entering the timer mode, the timer mode ends and returns to the original display. [EXAMPLE] ON timer and either Sleep timer or OFF timer are set together, the temperature of ON timer is not displayed. ON timer and either Sleep timer or OFF timer are set together, OFF timer (or Sleep timer) shows preference. Number 2 : Number 3 : Number 1 : 1 2 3 4 Press the RESET button to return to step 1 display. 10 Press button. The timer mode is finished.
* Four operations can be set with only ON timer or only OFF timer. Number 4 : 7