Name and Function of Each Part Name and Function of Each Part Front ML-32000-180 9 No. Name Description 1 Emergency stop button Stops operation of this machine immediately. 2 Mist filter cover Use this maintenance window to clean/replace the mist filter. 3 Ink rack Houses the ink cartridge. 4 Pause button Printing is paused and the print head comes to a stop either on the flushing plate or at the cleaning station area. 5 Waste ink tank Waste ink collects in this tank. Two locations: At the bottom of the flush- ing plate and at the bottom of the cleaning station. 6 Belt cleaning unit Cleans ink and other foreign material adhering to the belt.
Open this cover to clean the cleaning brushes and scrapers. 7 Water supply valve This is the water supply valve on the belt cleaning unit. 8 Belt This belt feeds fabric attached to it. 9 Entanglement detection sensor Located on the lower front side of the belt. Prevents hands and fingers from becoming caught in the belt. It is installed on the belt cleaning unit. 10 Tangled fabric detection sensor Located on the front side of the belt. Prevents fabric from becoming caught in the belt. 11 Front panel Location of the operating panel for performing operations on the front of the machine. (Page 23)