In the pictures in this manual, the cover or safety shield is disassembled only when explaining the details of the product. During operation, install the top cover and wiring correctly according to the provisions. Refer to the operation descriptions in the manual to ensure safety. The figures in this instruction are only for reference and may be slightly different depending on your model, but it will not affect your customer rights. The content of this manual may be revised without prior notice. Consult our distributors or download the latest version at http://www.deltaww.com/iadownload_acmotordrive . II capacitor before starting to run the motor drive.
Do NOT run the motor drive at 100% rated voltage right away. Pay attention to the following when transporting and installing this package (including wooden crate and wood stave). 1 If you need to deworm the wooden crate, do not use fumigation or you will damage the drive. Any damage to the drive caused by using fumigation voids the warranty. 2 Use other methods, such as heat treatment or any other non-fumigation treatment, to deworm the wood packaging material. 3 If you use heat treatment to deworm, leave the packaging materials in an environment of over 56°C for a minimum of thirty minutes.
Connect the drive to a three-phase three-wire or three-phase four-wire Wye system to comply with UL standards. If the motor drive produces a leakage current of over 3.5mA AC or over 10mA DC on the Protective Earthing conductor, the minimum specifications required of the Protective Earthing conductor to be installed have to comply with the national, local laws and regulations or follow IEC61800-5-1 to do grounding. NOTE