Operation The appliance is suitable for blending mayonnaise, sauces, mixed drinks, baby food, cooked fruit and vegetables. For purйeing soups. Use the universal cutter for cutting/chopping raw food (onions, garlic, herbs)! It is recommended to use the supplied blender jug. However, other suitable receptacles can also be used. ^ннЙенбзе> qЬЙ=Дзннзг=зС=нЬЙ=кЙЕЙйн~ЕдЙ=пЬбЕЬ=узм=млЙ= гмлн=езн=Ь~оЙ=~еу=Дмгйл=зк=кЙЕЙллЙлК Cleaning ^ннЙенбзе> kЙоЙк=бггЙклЙ=нЬЙ=Д~лЙ=мебн=бе=дбимбЗл=~еЗ= Зз езн=ЕдЙ~е=бе=нЬЙ=ЗблЬп~лЬЙкК аз=езн=млЙ=~=лнЙ~г=ЕдЙ~еЙк> рмкС~ЕЙл=г~у=ДЙ=З~г~ЦЙЗК=аз=klq=млЙ= ~Дк~лбоЙ=ЕдЙ~ебеЦ=~ЦЙенлК If processing e.g.
red cabbage and carrots, the plastic parts will become discoloured by a red film which can be removed with a few drops of cooking oil. Pull out the mains plug! Wipe the base unit with a damp cloth and then wipe dry. The blender jug can be cleaned in the dishwasher. Clean the blender foot in the dishwasher or with a brush under running water. Dry the blender foot in an upright position (blender blade face up) so that any trapped water can run out. kзнЙW ^ййдб~еЕЙл=пбнЬ=лйбк~д=Е~ДдЙW= kЙоЙк=пбеЗ=нЬЙ=Е~ДдЙ=~кзмеЗ=нЬЙ=~ййдб~еЕЙ> Troubleshooting (MSM67..) en Before using the appliance for the first time, clean all parts of it. Fig. Completely unwind the power cord.
Place the blender foot on the base unit and lock into position. Insert the mains plug. Place food in the blender jug or another tall receptacle. The appliance works better if there is some liquid in the ingredients. Set the required speed with the speed control ( Fig. -5). It is recommended to use a low speed setting for liquids, hot food and for mixing (e.g. muesli in yoghurt). The high speed settings are recommended for the processing of more solid foods. Firmly hold the hand blender and jug. Switch on the hand blender by pressing the required On button.
When switching on the hand blender, hold it at a slight angle to prevent it from “sticking” to the bottom of the blender jug. The hand blender remains switched on as long as the On button is pressed. To prevent the ingredients from splashing, do not press the On button until the blender foot has been immersed in the ingredients. Always switch off the hand blender before taking it out of the processed food. Release the On button after processing. After using the appliance: Remove mains plug. Press the release buttons and remove the blender foot from the base unit. Fault Remedial action The appliance switches off while it is being used or the speed indicator (if fitted) starts flashing.
The overload protection feature has been activated. Switch off the appliance and pull out the mains plug. Leave the appliance to cool down for approx. 1 hour in order to deactivate the overload protection device. Switch on the appliance again. If the fault cannot be eliminated, please contact customer service. Robert Bosch Hausgerдte GmbH 5