en Before using the appliance Grater attachment The grater attachment is suitable for grating hard foods, e.g. almonds, nuts, chocolate, hard cheese or dry bread rolls. Note: Only process dry nuts and al- monds in small quantities. Overload protection The overload protection system pre- vents the motor and other compon- ents from being damaged through being overloaded. If the meat mincer is overloaded or blocked, the agitator paddle on the worm gear will break at the predeter- mined breaking point. Note: Spare parts with a predeter- mined breaking point are not covered by our warranty obligations. A new agitator paddle is available from cus- tomer service under order number 00418076.
1 Special accessory Special accessory You can find an overview of the spe- cial accessories and how to use them here. Perforated discs The fine and the coarse perforated disc are suitable for additional pro- cessing functions. Replacing the agitator paddle 1. Release the fastening screw in the agitator paddle using a suitable screwdriver and remove. 2. Remove the faulty agitator paddle. 3. Insert a new agitator paddle and Juicer attachment The juicer attachment is suitable for squeezing soft fruit and vegetables, e.g. berries, tomatoes, apples, pears, rose hips. Notes Ў Do not press fruit whose pips are screw tight.
Before using the appliance Before using the appli- ance similar in diameter to the hole dia- meter in the strainer insert, e.g. raspberries. Ў Cook hard food before squeezing Before using the appliance Prepare the base unit and the ac- cessories for use. to make it soft enough, e.g. rose hips. Preparing the base unit Viennese whirl attachment The Viennese whirl attachment is suit- able for shaping biscuit dough or shortcrust pastry. Note: The food processor shown in the pictures may differ from your model in terms of shape and fea- tures.
18 9 Worm gear for juicer attachment 10 Strainer housing 11 Juicer housing 12 Perforated disc, fine 13 Perforated disc, coarse 14 Worm gear for grater attachment 15 Grater drum 16 Cover 17 Holder for shape plate 18 Shape plate