This page shows the a active user e events in the e selected C Controller. (10 0) (9) (2 2) (8) (1 1) (4) (5) (6) (11 1) 25 5 ５-５ A ctive Us er Events Page (7) (3) No Name De scription 1 Event Shows a list of active user errors of the selected Controller. Group names of active user events are displayed in the “Group” Column. Event level of active user events is displayed in the “Event Level” Column. Event codes of active user events are displayed in the “Event Code” Column. Event names of active user events are displayed in the “Event Name” Column. If you click on an event, the line will be selected.
If there are too many items in the listand not fit on the screen, you can scroll the list to view the non-displayed items.To scroll the list, drag or flick the scroll bar displayed on the right side of the listor the listed page. The polling and refreshing intervals for the list are 10 seconds or so. 2 “Controller Events” button/indcator You can move to [Active Controller Events Page] by clicking this button. The indicator to the left side of the indicator is lit in red if there is a controller event, and lit in greenif there is no controller event. The polling and refreshing intervals for the indicator are 1 second or so.
3 “User Events” button/indcator The button is highlighted in yellow to notify the user that the displayed errors are user events. The indicator to the left side of the indicator is lit in red if there is a user event, and lit in green if there is no user event. The polling and refreshing intervals for the indicator are 1 second or so. 4 “Show Detail” button The button is enabled only when a user error is selected from the list. You can move to [Active User Event Detailed Information] by clicking this button. 5 “Screen Shot” button The displayed screen is captured by clicking this button and stored in the set device in PNG format.