26 Access level can be set to this button. This button is enabled only when the set access level matches with the user’s access level. A confirmation dialog box is displayed before and after saving the screen. 6 “Error Reset” button The entire listed user events are reset by clicking this button.In case the error cause still persists, the error will be detected again. Access level can be set to this button. This button is enabled only when the set access level matches with the user’s access level. A confirmation dialog box is displayed before and after resetting the event. 7 “Event Logs” tab You can move to [User Event Logs Page] by selecting this tab page.
8 “Back” button You can move to [Active Events Controller Status Page] by clicking this button. 9 “Exit” button The troubleshooter exits by clicking this button, and moves to the system menu or to the user page of right before the troubleshooter startup. 10 Title bar Shows the current date and time set in the NA. The display format depends on the current project language. 11 Status bar Shows the operation mode of the selected Controller. RUN” appears in RUN mode and ”PROGRAM” in PROGRAM mode. Shows the selected controller name and IP address.