Event Logs – Controller Events When “ Yes ” appears in the Controller Event Status column on the “Event Logs” tab, it means that there is a log of the errors that have occurred so far in the controller. Check for the log following the procedure below. 16 1. When “Yes” is displayed in the Controller Event Status column on the “Event Logs” tab, press the “Show Controller Events” button at the bottom of the screen. 常画 Controller Event Status column on the “Event Logs” tab, press the “Show Controller Events” button at the bottom of the screen. 2. The screen is switched to “Controller Events”. A list of the controller events that have occurred so far is displayed.
Select an event from the list and press “Show Detail” at the right bottom of the screen. 3. The details of the event that is selected in Step 2 appear. You can recover from the problem by referring to what is displayed in “Detailed Information”.