Event Logs – User Events When “Yes” appears in the User Event Status column on the “Event Logs” tab, it means that there is a log of the errors created in Step 5 in Section 2-3 (on Page 10). Check for the log following the procedure below. 17 1. When “Yes” is displayed in the User Event Status column on the “Event Logs” tab, press the “Show User Events” button at the bottom of the screen. User Event Status column on the “Event Logs” tab, press the “Show User Events” button at the bottom of the screen. 2. The screen is switched to “User Events”. A list of the user events that have occurred so far is displayed.
Select an event from the list and press “Show Detail” at the right bottom of the screen. 3. The details of the event that is selected in Step 2 appear. You can recover from the problem by referring to what is displayed in “Detailed Information”. 4. You can clear the event log by pressing the “Log Clear” button in the screen that shows the list of the user events described in Step 2. Pressing the button displays the “Do you really want to clear the event log?” message. Press “Yes”.