7 ． EtherNet/IP Connection Procedure 20 5 The OMRON FZ5 EIP EV100 _ _ _ project is displayed. The left pane is called Multiview Explorer, the right pane is called Toolbox and the middle pane is called Edit Pane. Multiview Edit Pane Toolbox Explorer * If an error message is displayed stating "Failed to Load Descendants", change the version of the Sysmac Studio to the version specified in 5.2. Device Configuration or higher version. 6 Select Check All Programs from the Project Menu. 7 The Build Tab Page is displayed on the Edit Pane. Confirm that "0 Errors" and "0 Warnings" are displayed. 8 Select Rebuild Controller from the Project Menu. 9 A confirmation dialog box is displayed.
Confirm that there is no problem and click the Yes Button. 10 Confirm that "0 Errors" and "0 Warnings" are displayed in the Build Tab Page.