8 ． Initialization Method 8. Initialization Method This document explains the setting procedure from the factory default setting. Some settings may not be applicable as described in this document unless you use the devices with the factory default setting. 8.1. Initializing the Controller To initialize the settings of the Controller, the CPU Unit and EtherNet/IP port need to be initialized. Change the Controller to PROGRAM mode before the initialization. 8.1.1. EtherNet/IP port Delete the connection information and tag information that are set for the EtherNet/IP port.
Follow the procedure below to set blank connection information and blank tag information and delete them using the Network Configurator. (1) Deleting connection information Select the Connections Tab of the Edit Device Parameters Dialog Box and move all devices registered in the Register Device List Field to the Unregister Device List Field. If a confirmation dialog is displayed when you remove devices from the registration list, click the Yes Button. No registered devices 33