4 ． Overview 4. Overview This document describes the procedure for connecting the Vision System (FZ5 Sensor Controller + Camera)(FZ5 series) of OMRON Corporation (hereinafter referred to as OMRON) to NJ-series Machine Automation Controller (hereinafter referred to as the Controller) via EtherNet/IP and provides the procedure for checking their connection. It also contains the procedure for performing EtherNet/IP tag data link using the EtherNet/IP settings of the project file that is prepared beforehand (hereinafter referred to as the "Procedure for Using the Configuration Files").
Section 9 Appendix 1 and Section 10 Appendix 2 describe the procedures for setting parameters with software without using files (hereinafter referred to as the "Procedure for Setting Parameters from Beginning"). To follow the "Procedure for Using the Configuration Files", obtain the latest "Sysmac Studio project file" and "Network Configurator v3 network configuration file" (they are referred to as "Configuration Files") from OMRON in advance. 4 Name File name Version OMRON FZ5 EIP EV100.smc2 _ _ _ OMRON FZ5 EIP EV100.nvf _ _ _