5 ． Applicable Devices and Device Configuration 5.2. Device Configuration The hardware components to reproduce the connection procedure of this document are as follows: Personal computer (Sysmac Studio installed, OS: Windows 7 ) NJ501-1500 (Built-in EtherNet/IP port) FZ5-L350 USB connected mouse Switching hub W4S1-05C FZ-VS FZ-M08 FZ-SC2M Precautions for Correct Use Prepare the latest "Sysmac Studio project file" and "Network Configurator v3 network configuration file" from OMRON in advance.
(To obtain the files, contact your OMRON representative.) 6 USB cable LAN cable Manufact Name Model Version urer OMRON NJ-series CPU Unit (Built-in EtherNet/IP port) NJ501-1500 Ver.1.07 OMRON Power Supply Unit NJ-PA3001 OMRON Switching hub W4S1-05C Ver.1.00 OMRON Sysmac Studio SYSMAC-SE2[][][] Ver.1.08 OMRON Network-Configurator (Included in Sysmac Studio.) Ver.3.56 OMRON Sysmac Studio project file OMRON FZ5 EIP EV100.smc2 _ _ _ Ver.1.00 OMRON Network Configurator v3 network configuration file OMRON FZ5 EIP EV100.nvf _ _ _ Ver.1.00 - Personal computer (OS:
Windows 7) - - USB cable (USB 2.0 type B connector) - - LAN cable (STP (shielded, twisted-pair) cable of Ethernet category 5 or higher) - OMRON FZ5 Sensor Controller FZ5-L350 Ver.5.12 OMRON Camera FZ-SC2M OMRON Camera cable FZ-VS OMRON Monitor (analog RGB monitor) FZ-M08 - USB connected mouse -