3.2.7. Creating the Programming Terminal Screen You insert the Programmable Terminal in the Sysmac Studio project and create a Programmable Terminal screen for the operation and display. Additional Information Refer to the Sample File No. 2 PLCCoderDemoMC.smc2 that is provided separately for 35 the above program. 1 Select HMI – NA5 from the Insert Menu of the Sysmac Studio. 2 Make the settings as shown below in the Add Device Dialog Box and click the OK Button. Category: HMI Device: NA5-12W101 Version: 1.01 3 Create a Programmable Terminal screen for the following processing.
- Servo ON/OFF operation and status display - Homing operation - Start/stop of movement to the command position and status display - Status display of completion of movement to the command position - Command position setting and display - Current position display - Velocity command value display