Precautions • When building a system, check the specifications for all devices and equipment that will make up the system and make sure that the OMRON products are used well within their rated specifications and performances. Safety measures, such as safety circuits, must be implemented in order to minimize the risks in the event of a malfunction. • Thoroughly read and understand the manuals for all devices and equipment that will make up the system to ensure that the system is used safely. Review the entire contents of these manuals, including all safety precautions, precautions for safe use, and precautions for correct use.
• Confirm all regulations, standards, and restrictions that the system must adhere to. • Contact The MathWorks ® Inc. for the codes that were outputted from Simulink ® PLC Coder™. • Applicability of codes that were outputted from Simulink ® PLC Coder™ must be judged by the customer. • Check the user program for proper execution before you use it for actual operation. • Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in • EtherCAT ® is registered trademark and patented technology, licensed by Beckhoff Japan and other countries for OMRON factory automation products. Automation GmbH, Germany.
• MATLAB ® and Simulink ® are registered trademarks of The MathWorks ® Inc. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. Other company names and product names in this Guide are the trademarks or registered trademarks of their respective companies. The NJ/NX/NY-series Controller and the Sysmac Studio incorporate certain third party software. The license and copyright information associated with this software is available at http://www.fa.omron.co.jp/nj_info_e/. 5 Trademarks Software Licenses and Copyrights