Related Manuals The following manuals are related to the NJ/NX/NY-series Controller. Use these manuals for reference. 6 Manual name Cat. No. Model numbers Application Description Sysmac Studio Version 1 Operation Manual W504 SYSMAC-SE2□□□ Learning about the operating procedures and functions of the Sysmac Studio. The operating procedures of the Sysmac Studio are described. NX-series CPU Unit Hardware User’s Manual W535 NX701-□□□□ Learning the basic specifications of the NX-series CPU Units, including introductory information, designing, installation, and maintenance. Mainly hardware information is provided.
Provides an introduction to the entire NX701 system along with the following information on the CPU Unit. • Features and system configuration • Introduction • Part names and functions • General specifications • Installation and wiring • Maintenance and inspection NX-series NX1P2 CPU Unit Hardware User's Manual W578 NX1P2-□□□□ Learning the basic specifications of the NX1P2 CPU Units, including introductory information, designing, installation, and maintenance. Mainly hardware information is provided. Provides an introduction to the entire NX1P2 system along with the following information on the CPU Unit.
• Features and system configuration • Introduction • Part names and functions • General specifications • Installation and wiring • Maintenance and inspection NJ-series CPU Unit Hardware User’s Manual W500 NJ501-□□□□ NJ301-□□□□ NJ101-□□□□ Learning the basic specifications of the NJ-series CPU Units, including introductory information, designing, installation, and maintenance. Mainly hardware information is provided. Provides an introduction to the entire NJ-series system along with the following information on the CPU Unit. • Features and system configuration • Introduction • Part names and functions • General specifications • Installation and wiring • Maintenance and inspection