No. 600 Prices Pounds Sterling Carriage Extra Issued October 2003 Section 1 Cabinets / Stands / Trays / Raising Blocks / Vibration Mounts 2 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl.
VAT £ 20/207 Steel drip tray with drainplug, for machines admitting 330mm (13) for machines from serial number 159991 40.14 47.16 20/208 Steel drip tray with drainplug, for machines admitting 460mm (18) for machines from serial number 159991 43.62 51.25 20/190 Tray top cabinet stand fitted with mats and steel drip tray (20/207), for lathes admitting 330mm (13) between centres 274.39 322.41 20/191 Tray top cabinet stand fitted with mats and steel drip tray (20/208), for lathes admitting 460mm (18) between centres 293.49 349.85 80076 Set of four mounts for use with cabinet stand 70.25 82.54 20/200 Set of raising blocks (2 units) for machines up to serial No.
15591 includes pair 13291 bushes 86.27 101.37 20/024 Deep tray only with drain plug (as fitted to 20/038 stand) 44.56 52.36 20/024L Deep tray as above but for long bed lathes (as fitted to 20/225 stand) 47.02 55.49 13859/1 Splash guard for standard bed lathe 22.65 26.61 13871 Splash guard for existing lathes fitted to long bed tray top cabinet stand 49.05 57.63 (The above two splash guards are to suit 20/038 cabinet stand, or 20/024L deep trays only.) 30/065 Motor chip guard for existing machines (fitted as standard on all new Series 7 lathes), prevents swarf from entering right hand end of motor casing 27.52 32.34 20/025 Raising block with jack screws and securing screw....................pair 73.49 86.35 20/038 Tray top cabinet stand for standard bed machines, fitted with two cork mats, deep tray (20/024) and raising blocks (20/025) 354.72 416.80 80076 Set of four mounts for use with cabinet stand 70.25 82.54 20/226 Industrial stand for standard bed machines, with two cork mats and raising blocks (20/025) 545.65 641.12 20/227 Industrial stand for long bed machines, admitting 790mm (31) between centres, with two cork mats and raising blocks (20/025) 582.20 684.09 80075 Set of four mounts for use with industrial stands 72.70 85.42 20/228 Splash guard for 20/226 industrial stand 180.59 212.19 20/229 Splash guard for 20/227 industrial stand 186.63 219.29 95/238 Hook on door for 254 lathe, 95/238 67.12 78.87 95/168 Splash guard for standard lathe, for 254 plus models from serial number ZS164451 180.59 212.19 95/169 Splash guard for long bed lathe, for 254 plus models from serial number ZS164451 187.33 220.11