No. 600 Prices Pounds Sterling Carriage Extra Issued October 2003 Section 1 Lights / Coolant Equipment / Emergency Stop Switches / Oils / Section 1 Paints / Replacement Switches 3 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl.
VAT £ 60/043F Halogen safe worklight and transformer, single phase, if supplied with machine 77.44 90.99 60/043R Halogen safe worklight and transformer, single phase, if supplied subsequently (Countershaft arm fitting drawing number 12281/1 required.) 42.89 50.40 95/037 Halogen safe worklight for existing models 95/188-95/208 inclusive (Transformer already provided in electrical specification.) 68.22 80.16 60264 Spare 20 watt, 12 volt halogen bulb (suits all current safe worklights) 10.23 12.02 60233 Spare 20 watt, 24 volt halogen bulb (suits older safe worklights) 11.20 13.16 Coolant equipment supplied separately for external mounting including pump, tank, delivery return pipes, delivery fitting for saddle with bracket, cock and telescopic pipe, also pump switch built into pump.
1488AEXT for three phase 355.08 417.22 1488BEXT for single phase 396.73 466.16 95/081 for single phase 396.73 466.16 95/083 for three phase 355.08 417.22 30/056 Telescopic suds delivery fitting, for existing coolant systems, including: bracket for attachment to the saddle, suds cock and telescopic pipe assembly, and A2815/1 pipe assembly 73.21 86.02 (Note: Give exact details (voltage, phase and periodicity) when ordering.) 61259 Emergency foot switch with 100mm (4) dia.
head 88.55 104.05 80202 Rocol 250HW soluble cutting oil - 1 litre 8.10 9.52 80201 Rocol RTD cutting spray - 300ml 16.22 19.06 80200 Rocol RTD cutting compound - 500 gram tin - ideal for tops and dies 11.95 88.55 14.09 104.05 80195 Preservative oil - 1 litre - ideal for applying to bright metal parts of a lathe and/or accessories if the machine and/or equipment is to be laid up for any length of time. Can be washed off with white spirits or substitute of turpentine 8.96 10.53 33/040 33/041 33/042 33/038 33/039 33/039 80203 Paints: 250ml tins of synthetic air drying enamel touch-up paint in colours:
Hammer finish - Silver Grey Hammer finish - Dark Grey Hammer finish - Green Grey Green Aquamarine Thinners - Trimite C30 (1 litre) 5.90 5.90 5.90 7.30 7.30 7.30 6.25 6.93 6.93 6.93 8.58 8.58 8.58 7.34 60/056 60/058 Replacement: Dewhurst & Partner Drum Type Reversing Switches Myford are unable to supply these switches as, in our opinion, they do not comply with current regulations for our application. As an alternative Myford supply a combined push button on/off starter with reversing switch, no-volt release, thermal overload protection to the motor, and turn to release mushroom head stop button.
Isolation and power inlet is via a CEE17 plug with 3 metres HO7 insulated 3 core cable, and power outlet to the motor by 1.4 metre HO7 insulated 5 core cable. (This switch is specially manufactured for Myford in Germany.) Reversing switch for Series 7 lathes fitted 3/4 hp, 230 volts, 50 Hz, AC single phase motor Reversing switch for Series 10 lathes fitted 3/4 hp, 230 volts, 50 Hz, AC single phase motor 98.44 98.44 115.67 115.67