Node Configuration ( Video ) 27.) From the CPU drop down list, select “new_SafetyCPU0”. Notice that the icon for the controller changed. 28.) In Multiview Explorer -> Configurations and Setup -> Communications -> Safety -> Safety I/O -> EIP/Unit2: (Module type) (Instance) -> double click on “Parameter”. 29.) In the toolbox, open up the type of safety device that will be wired into I/O module. The bottom area has a description of the device. 30.) If you don’t know what device configuration is needed, contact your Omron distributor or Omro n Account Manager for a copy of the “NX Safety Selection Setup and Programming Guide”. 31.) Note:
Click on the white X in the upper right corner to view all of the nodes. 32.) Drag and drop the device type from the tool box and attach it to the node. The node stubs will turn green when it can be dropped. QSG-NX-S-STANDALONE - Version 3.2 Feb. 27, 2015 Page 15 OMRON AUTOMATION & SAFETY • © 2015 Omron Electronics LLC • www.omron247.com