Related Manuals Related Manuals The following are the manuals related to this manual. Use these manuals for reference. 22 NJ-series Robot Integrated System Startup Guide (O049) Manual name Cat. No. Model numbers Application Description NJ-series CPU Unit Hardware User's Manual W500 NJ501-££££ NJ301-££££ NJ101-££££ Learning the basic specifications of the NJ-series CPU Units, including introductory information, design- ing, installation, and maintenance. Mainly hardware in- formation is provided. An introduction to the entire NJ-series system is provided along with the follow- ing information on the CPU Unit.
• Features and system configuration • Introduction • Part names and functions • General specifications • Installation and wiring • Maintenance and inspection NJ/NX-series CPU Unit Software User’s Manual W501 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Learning how to pro- gram and set up an NJ/NX-series CPU Unit. Mainly software infor- mation is provided. The following information is provided on a Controller built with an NJ/NX-series CPU Unit.
• CPU Unit operation • CPU Unit features • Initial settings • Programming based on IEC 61131-3 language specifications NJ/NX-series Instructions Reference Manual W502 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Learning detailed specifications on the basic instructions of an NJ/NX-series CPU Unit. The instructions in the instruction set (IEC 61131-3 specifications) are described. NJ/NX-series CPU Unit Motion Control User’s Manual W507 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Learning about mo- tion control settings and programming concepts. The settings and operation of the CPU Unit and programming concepts for mo- tion control are described.
NJ/NX-series Motion Control Instructions Reference Manual W508 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Learning about the specifications of the motion control in- structions. The motion control instructions are descri- bed. NJ/NX-series CPU Unit Built-in EtherCAT® Port User’s Manual W505 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Using the built-in EtherCAT port on an NJ/NX-series CPU Unit. Information on the built-in EtherCAT port is provided. This manual provides an introduction and provides information on the configuration, features, and setup.
NJ/NX-series CPU Unit Built-in EtherNet/IP™ Port User’s Manual W506 NX701-££££ NX102-££££ NX1P2-££££ NJ501-££££ NJ301-££££ NJ101-££££ Using the built-in EtherNet/IP port on an NJ/NX-series CPU Unit. Information on the built-in EtherNet/IP port is provided. Information is provided on the basic setup, tag data links, and other features. NJ-series Robot Integrated CPU Unit User’s Manual O037 NJ501-R£££ Using the NJ-series Robot Integrated CPU Unit. Describes the settings and operation of the CPU Unit and programming concepts for OMRON robot control.