Charging the Printer ! CAUTION: ❏ Charge the printer at an ambient temperature between 10 and 30°C {50 and 86°F}. ❏ Make sure there is no foreign matter or grease, etc., adhering to the charging terminal. 1. Set the printer in the quad charger. Push down the printer until it clicks. 2. Charging starts and the Charge LED turns on. 3. When charging is complete, the Charge LED turns off. Press the Release button and remove the printer. Cleaning the Quad charger Before cleaning the quad charger, unplug its AC cable from the outlet, without fail, and wipe off dirt with a dry or slightly wet cloth. ! CAUTION: Do not use alcohol, benzene, thinner, trichlene, or ketone solvent.
Using such solvents may transform or damage the plastic or rubber parts. 6