Remote Access Settings 5.3. LinkManager User Account Settings The LinkManager user account settings for GateManager login are given below. As they, except for the account role and account language, are determined and managed by the user, their setting values must be determined in advance. 5.4. Controller Setup The NX102-1200 Controller is used in this guide. The port 1 is used as a remote access connection destination, and the default value is used for the IP address. IP address 192.168.250.1 (default) Subnet mask 255.255.255.0 (default) Precautions for Correct Use The procedure for setting up the Controller is based on the factory default settings.
Refer to Section 7 Initialization Method for information on how to initialize the Controller. 10 Startup Guide – Remote Access - RT1 Series - P151-E1-02 Setting item Setting value Remarks LM-User01 LinkManager User English XXXXX xxxxx@xxxx.xxx ●●●●●●●●●●●● Setting item Controller (Port 1)