1. Connection Procedure for Remote Access Startup Guide – Remote Access - RT1 Series - P151-E1-02 21 2 Check the positions of UPLINK UPLINK port, DEV1–DEV3 ports, I/O port ports (DC input terminals) and if necessary, Connector for DEV1–DEV3 antenna and SIM card slot by ports referring to the figure on the I/O ports right. (DC input terminals) *As a reference example, the Front view Bottom view figure on the right shows the W5M3010 model (WiFi connection). SIM card slot (located here on the 4GM3010 model) Connector for antenna (not available for the EMM3010 model) Front view of the W5M3010 model 3 Connect Power supply to DC DC input terminal block input terminals on the bottom of SiteManager.
Power supply *For information on power supply connection to SiteManager, refer to the The DC input terminal block for I/O ports is instruction sheet delivered with provided with SiteManager. your product for details.