/ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate. HC-X900M HC-X900 When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate. HC-X800 / When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the sound is stereo (2 ch) and only the front-left and front-right input level meters function. The microphone input level meter shows the largest volume for the microphones. You cannot record with the audio completely muted. HC-X900M HC-X900 / [BASS SETTING] HC-X900M HC-X900 Change the lower setting of the built-in microphone according to your choice. Switch to Manual Mode. ( l 83) MENU :
[RECORD SETUP] # [BASS SETTING] # desired setting [0dB]/[+3dB]/[+6dB]/[LOWCUT] Normally set to [0dB]. Select [+3dB] or [+6dB] to get strong power feeling at bass level. [PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. This setting is retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. Switch to Manual Mode. ( l 83) 1 Select the menu. 2 Touch the desired setting items. MENU : [RECORD SETUP] # [PICTURE ADJUST] 4 Touch [ENTER]. Touch [EXIT] to complete the settings. appears on the screen. 77 VQT4C76 [SHARPNESS]: Sharpness of the edge [COLOR]:
Depth of the color of the image [EXPOSURE]: Brightness of the image [WB ADJUST]: Picture color balance 3 Touch / to adjust settings.