[ZEBRA] Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). Switch to Manual Mode. ( l 83) : [RECORD SETUP] # [ZEBRA] # [ON] It is possible to set from the quick menu in Manual Mode. ( l 42) MENU You can record an image with little white saturation if you manually adjust the shutter speed or brightness (Iris/Gain) ( l 85). The zebra pattern does not appear on the images actually recorded. A Zebra pattern [LUMINANCE] Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. Adjust the brightness using [IRIS]. ( l 85) Switch to Manual Mode. ( l 83) : [RECORD SETUP] # [LUMINANCE] # desired setting It is possible to set from the quick menu in Manual Mode. ( l 42) MENU over 99%. [HISTOGRAM] A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is displayed. It is possible to determine the exposure of the whole image by looking at the distribution in the graph. Adjust the brightness using [IRIS]. ( l 85) Switch to Manual Mode. ( l 83) 78 VQT4C76 [ON ADJUST]:
Display only when [IRIS] is adjusted. (l 85) [ALWAYS]: Constantly display. [OFF]: Cancel the setting. A Luminance display frame B Luminance level 50% ≥Luminance level is displayed between 0% and 99%. It will be displayed as 99% when it is