Let’s Get Started Important: R Depending on the connected Bluetooth ® device, a loud sound may be output during playback. Check the volume setting of the Bluetooth ® device before starting playback. 1 Install and launch the [Technics Audio Connect] app on the subsequent Bluetooth ® device. 2 Follow the on-screen instructions. R If you pair a device when the maximum number of paired Bluetooth ® devices is exceeded, previously paired devices will be overwritten. To use overwritten devices again, pair them again. R Pairing a subsequent device is easier if you turn off Bluetooth ® in the first device.
R When pairing a subsequent device, the earphones will cancel pairing mode and go into connection standby mode if the device is not connected within 5 minutes. Pair again. R The unit remembers the last connected device. The unit may connect automatically after it is turned on. R The unit can connect to up to 3 Bluetooth ® devices at the same time. “Establish multi-point connections”, Page 40 Note: Pair the earphones with a subsequent Bluetooth ® device without the app You can pair up to 10 Bluetooth ® devices with the earphones. R When pairing with LE Audio compatible Bluetooth ® devices “Number of LE Audio connections”, Page 55 You can pair by using the touch sensors on the earphones.
(Example) R Using the earphones with a smartphone as the first device and a computer as the second device Important: R When pairing, keep the Bluetooth ® device and earphones close together. (Within about 1 m) R Depending on the connected Bluetooth ® device, a loud sound may be output during playback. Check the volume setting of the Bluetooth ® device before starting playback. 1 Put both earphones (L and R) into the charging cradle and charge. 2 Take out both earphones (L and R) from the charging cradle and wear them. 3 Touch and hold both touch sensors (L and R) at the same time until you hear the pairing sound. R A message about starting to pair plays, and a melody repeats.
To listen to the melody of the EAH-AZ100, click {{"Here"|tolink("https:// eww.pavc.panasonic.co.jp/avcacc/technics/sound-data/Pair_const_az100.wav")}}. To listen to the melody of the EAH-AZ80/EAH-AZ60M2/EAH-AZ40M2, click {{"Here"| tolink("https://eww.pavc.panasonic.co.jp/avcacc/technics/sound-data/Pair_const.wav")}}. 4 Turn on Bluetooth ® in the subsequent Bluetooth ® device. 5 From the Bluetooth ® menu in the subsequent Bluetooth ® device, select the earphones. R If you are asked to input a passkey, input the earphone passkey “0000” (four zeros). 36