Convenient Function If a Bluetooth ® device supports the “A2DP” and “AVRCP” Bluetooth ® profiles, you can use the earphones to play music and video. R With the EAH-AZ100, you can use the earphones to control LE Audio compatible Bluetooth ® devices to play music and videos. “About LE Audio (EAH-AZ100)”, Page 55 1 Connect the Bluetooth ® device and earphones. 2 On the Bluetooth ® device, select and play the music or video. R The earphones will play the audio of the music or video. R You can adjust the volume by using the touch sensor (L) on the earphones. “Use the touch sensors”, Page 41 EAH-AZ100: “Operating time (Earphones)”, Page 81 EAH-AZ80/EAH-AZ60M2:
“Operating time (Earphones)”, Page 83 EAH-AZ40M2: “Operating time (Earphones)”, Page 85 Note: R A2DP (Advanced Audio Distribution Profile): Transmits audio to the earphones. R AVRCP (Audio/Video Remote Control Profile): Allows remote control with the earphones. R Be aware that sound may leak from the earphones depending on the volume. R Music may sound distorted if you increase the volume to near maximum. Decrease the volume. R EAH-AZ100/EAH-AZ80/EAH-AZ60M2 : At default settings, the music pauses when you take off the earphones during playback, and resumes when you wear them again within about 1 minute. You can change the settings.
“Set the headphone fitting sensor (EAH-AZ100/EAH-AZ80/EAH-AZ60M2)”, Page 54 R The [Technics Audio Connect] app for the EAH-AZ100 allows you to hold conversations while wearing the earphones and listening to music. You must set in advance. “One-touch Conversation Mode (EAH-AZ100)”, Page 62 Listen to music Talk If a Bluetooth ® phone (mobile phone or smartphone) supports the “HSP” or “HFP” Bluetooth ® profile, you can use the earphones to talk. R With the EAH-AZ100, if a Bluetooth ® phone (mobile phone or smartphone) supports the LE Audio, you can use the earphones to talk. “About LE Audio (EAH-AZ100)”, Page 55 1 Connect the Bluetooth ® phone and earphones.
2 When receiving a call, touch an earphone touch sensor (L or R) once to answer. R When receiving a call, the ringtone plays from the earphones. R (HFP only) To reject a call, touch and hold a touch sensor (L or R) for about 2 seconds. 3 Talk. R You can adjust the volume or mute the call by using the touch sensors on the earphones. “Use the touch sensors”, Page 41 R With the EAH-AZ100, you can reduce the other party’s surrounding sounds by touching the touch sensor (R) 3 times during a call. You must set in advance. 38