Improving the sound quality 1 Press [PLAY MENU] repeatedly to select “FM MODE”. 2 Press [ R , T ] to select “MONO” and then press [OK]. To cancel, select “STEREO”. “MONO” is also canceled when you change the frequency. To memorize the setting Continue with step 4 of “Manual presetting” ( ~ 17). Checking the signal status Press [DISPLAY]. FM allocation setting This system can also receive FM broadcasts allocated in 0.1 MHz steps. 1 Press [RADIO]. 2 Press and hold [SELECTOR] on the main unit. After a few seconds, the display panel shows the current minimum radio frequency. Release the button when the minimum frequency changes. To go back to the initial setting, do the above steps again.
Preset frequencies are erased after you change the setting. Sound effects 1 Press [SOUND] repeatedly to select the sound effect. 2 Press [ R , T ] to select the setting and then press [OK]. TQBM0945 18 FM – – – – The FM signal is weak. The system is not tuned in to a station. FM ST The FM signal is in stereo. FM MONO “MONO” is selected as the “FM MODE”. The FM signal is in monaural. PRESET EQ “HEAVY” (default), “SOFT”, “CLEAR”, “VOCAL” or “FLAT” BASS –4 to +4 (default: 0) Using the main unit 1. Press [BASS]. 2. Press [2/3] or [5/6]. TREBLE –4 to +4 (default: 0) Using the main unit 1. Press [TREBLE]. 2. Press [2/3] or [5/6].
D.BASS “ON D.BASS” (default) or “OFF D.BASS” SURROUND “ON SURROUND” or “OFF SURROUND” (default)