Sleep timer The sleep timer turns off the system after the set time. 1 Press [SETUP] repeatedly to select “SLEEP”. 2 Press [ R , T ] to select the setting (in minutes) and then press [OK]. To cancel, select “OFF”. SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120 OFF Note: The remaining time is always shown on the display. The display changes temporarily when you perform other operations. The sleep timer always comes first. Be sure not to set an overlap of timers. Others Auto off This system automatically turns off when you do not use it for approximately 20 minutes. 1 Press [SETUP] repeatedly to select “AUTO OFF”. 2 Press [ R , T ] to select “ON” and then press [OK]. To cancel, select “OFF”. Note:
This function does not work when you are in radio source or when a Bluetooth ® device is connected. Bluetooth ® standby This function automatically turns on the system when you establish a Bluetooth ® connection from a paired device. 1 Press [SETUP] repeatedly to select “BLUETOOTH STANDBY”. 2 Press [ R , T ] to select “ON” and then press [OK]. To cancel, select “OFF”. Note: Some devices may take longer to respond. If you are connected to a Bluetooth ® device before turning off the system, wait for a minimum of 5 seconds before connecting to this system from your Bluetooth ® device again.
Software updates Occasionally, Panasonic may release updated software for this system that may add or improve the way a feature operates. These updates are available free of charge. For more details, refer to the following website. https://panasonic.jp/support/global/cs/ (This site is in English only.) TQBM0945 Checking the software version 1 Press [SETUP] repeatedly to select “SW VER.” and then press [OK]. The software version is shown. 2 Press [OK] again to exit. 20