PanelScan Integration Guide TCP/IP Communication Setup (cont.) • String1# = String to set the Work Order value in the job. Used in CSV export. • String2# = String to set the Family ID in job. Used in CSV export. • Product# = Job filepath to set in PanelScan. Entire path file. Example: C:\PanelScan\Jobs\Test.avp. • LotSize# = Number of DUTs in the Lot. Default is 0. If set to more, PanelScan will look for partial trays at the end of the Lot. • ReportFilePath# = Full file path of report folder created for this batch of trays . • String1# = String to set the Work Order value in the job. Used in CSV export. • String2# = String to set the Family ID in job. Used in CSV export.
• ProductName# = Product name as used in the Product List shown on the following page. PanelScan will load the corresponding job file. • LotSize# = Number of DUTs in the Lot. Default is 0. If set to more, PanelScan will look for partial trays at the end of the Lot. • ReportFilePath# = Full file path of report folder created for this batch of trays. 15 Copyright ©2019 Omron Microscan Systems, Inc.
Customer (Client) PanelScan (Server) *CONFIG(String1#;String2#;Product#;LotSize#) → (set Work Order, Family ID, and job file) ← *ACK(ReportFilePath#) (scan and process) ← *READ(String1#;String2#;Tray#) *ACK → Customer (Client) PanelScan (Server) *LOADJOB(String1#;String2#;ProductName#;LotSize#) → (set Work Order, Family ID, and job file) ← *ACK(ReportFilePath#) (scan and process) ← *READ(String1#;String2#;Tray#) *ACK →