PanelScan Integration Guide Basler Software Installation The Basler Pylon 5 Camera Software Suite 5.0.5.8999 must be installed first. Double-click the Basler_pylon_5.0.5.8999.exe file located in the BaslerPylonInstall folder on the USB drive to start the installation process. Pylon 5 has a streamlined and intuitive installation process. There are only two options the user has to select during installation: the Developer profile and GigE camera, as shown below. PC and Camera IP Configuration For the camera(s) to function, the PC and the camera(s) must be set up on the same network. These are the suggested network settings for both:
Computer IP Address – For the PanelScan Standard product, the NIC card must be set to static IP 192.168.254.2 (255.255.255.0) . Camera 1 IP Address – For the PanelScan Standard product, the single 6K line scan camera must be set to static IP 192.168.254.3 (255.255.255.0) . Camera 2 IP Address – For the PanelScan Wide product, the second 6K line scan camera must be set to static IP 192.168.254.4 (255.255.255.0) . The IP Address of the computer is set from the Control Panel. The IP Address of the cameras can be set from Start > Basler > Pylon 5 Camera Software Suite > Pylon IP Configurator (x64) . 9 Copyright © 2019 Omron Microscan Systems, Inc.