Instruments and Controls 14 Warning Message Procedure Airbag Fault Indicates that the SDM has detected a fault. As soon as conditions permit, safely stop the vehicle and switch the vehicle power system to the OFF position and contact an MG Authorised Repairer immediately. TPMS Fault Indicates that the tyre pressure monitoring system (TPMS) has detected a fault. Please contact an MG Authorised Repairer as soon as possible. Front Left/ Front Right/ Rear Left/ Rear Right Tyre Sensor Battery Low Indicates that the TPMS has detected a sensor has a low battery. Please contact an MG Authorised Repairer as soon as possible.
12V Battery Charging System Fault Indicates that the 12V battery charging system has detected a fault. Please contact an MG Authorised Repairer immediately. Warning Message Procedure DCDC Charge Fault Indicates that the CCU has detected a fault. Please contact an MG Authorised Repairer immediately. Vacuum System Fault Indicates that the vacuum system has detected a fault. As soon as conditions permit, safely stop the vehicle and switch the vehicle power system to the OFF position and contact an MG Authorised Repairer immediately. Motor Overheating Indicates that the motor has overheated. Please contact an MG Authorised Repairer as soon as possible.
Motor Fault Indicates that the drive motor has detected a fault. As soon as conditions permit, safely stop the vehicle and switch the vehicle power system to the OFF position and contact an MG Authorised Repairer immediately.