10 . English Installing TV 5 Unpacking and Installing the stands 1 2 screws required 2 screws required 2 3 Prior to attaching each stand, make sure to peel off the protective film where each stand goes in so it will not get stuck between the unit and the stand. Fasten the stand to the unit with 2 screws each (included). 6 Both stands should now be securely fastened. 7 Carefully lift the TV set as shown in the illustration and place it onto a stable, level surface. Note(s) Move to the front of the slipbox. 4 Carefully lay the TV set, with the screen side down, on the outer slipbox so as not to deform or damage chin at the bottom of the unit. Note(s) Back to Contents