11 . English 1 4 Fasten the stands to the TV with 4 screws (included). Ч2 Ч2 2 Note(s) While fastening the screws, hold the stand to prevent it from falling. 5 Both stands now be securely fastened. 3 Cover a table top with a cloth or blanket to avoid damage to the TV screen. Hold both sides of the TV set to place on the table. Note(s) A wide open space is recommended for assembly. When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit. A Phillips-head screwdriver is required to fasten the stands to the TV set.
To remove the stand from this unit, unscrew the phillips-head screws by reversing the procedure. Be careful not to drop the stand when you remove it. 6 Carefully lift the TV set as shown in the illustration and place it onto a stable, level surface. Note(s) Carefully lay the TV set, with the screen side down, on the front cardboard as shown in the figure. Back to Contents