Re-pair the unit with your Bluetooth device. Remote control does not work Before you press any playback control button, first select the correct source. Reduce the distance between the remote control and the unit. Insert the battery with its polarities (+/-) aligned as indicated. Replace the battery. Aim the remote control directly at the sensor on the front of the unit. Wi-Fi Wi-Fi Connection cannot be established. Check the availability of WLAN network on the router. Place the Wi-Fi router closer to the unit. Make sure the password is correct. Check the WLAN function or reboot the modem and Wi-Fi router.
Dolby Atmos This is a 15 mins power off function, one of the ERPII standard requirement for saving power Cannot achieve outstanding Dolby Atmos effects. For non-HDMI connections (such as use of USB, Bluetooth, Optical or AUDIO IN), limited height surround effects are generated. See the section of ‘Dolby Atmos’ about how to achieve best Dolby Atmos effects. When the unit’s external input signal level is too low, the unit will be turned off automatically in 15 minutes. Please increase the volume level of your external device. Play-fi Cannot discover the Play-fi supported devices from the app. Make sure the device is connected to the Wi-Fi. Cannot play Play-fi music.
Certain network service or contents available through the device may not be accessible in case the service provider terminates its service. When the first time set up is not successful, close the Philips Sound app powered by DTS Play-fi. Restart the app. When the speaker was set as Stereo Pairs or Surround Sound, the speaker need to be disconnected in the App before use separately. 30 EN