4. Connections 4.1. Connection to a TV HDMI connection (Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.) Your TV HDMI cable (not included) HDMI IN (*1) 1080i: Outputs video data with a frame rate of 30 frames per second. (*2) 1080p: Outputs video data with a frame rate of 60 frames per second. (*3) 1080p/24: Outputs video data with a frame rate of 24 frames per second. Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched. Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility. When connected to an HDCP incompatible display device, the picture will not be displayed properly. If the TV receives no audio / video signal after properly connecting the unit and the TV with an HDMI cable, it may be the TV. Please refer to the TV's user's manual. Note If the TV receives no audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV input is not an HDMI-DVI input terminal. 4.2. Connection to an audio system When you change the connections, all devices should be turned off.
When connecting the unit to an external audio system, refer to the user manual for setup / configuration help. HDMI audio connection AV receiver / amplifier with an HDMI input jack HDMI cable (not included) HDMI IN Your TV HDMI OUT HDMI cable (not included) HDMI IN 13 EN