4.3. HDMI audio output *1 If there is secondary audio or Interactive audio, it will be output in Dolby Digital. *2 Only the core substream is decoded. *3 If there is secondary audio or Interactive audio, it will be output in DTS. If the connected device is not compatible with HDMI Bitstream, audio will be output as multi LPCM or 2-channel down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream” in “HDMI Audio” setting. Note If “HDMI Audio” is set to “Bitstream” and this unit is connected to a Bitstream compatible device, only primary audio of the BD-Video will be output.
(Secondary audio and button sounds will not be output.) In order to configure “HDMI Audio” settings, the following conditions must be met: “Voice Guide” is set to “Off”. This unit is not in resume-on-stop mode. If this unit is in resume-on-stop mode, remove the disc to enable configuration.
14 EN “AUDIO” > “HDMI audio” setting A Bitstream LPCM Re-encode Media Source BD Dolby Digital Dolby Digital 2ch PCM Dolby Digital Dolby Digital Plus Dolby Digital Plus 2ch PCM Dolby Digital Plus*1 Dolby TrueHD Dolby TrueHD 2ch PCM Dolby TrueHD*1 DTS DTS 2ch PCM DTS DTS-HD High Resolution DTS-HD High Resolution 2ch PCM*2 DTS-HD High Resolution*3 DTS-HD Master Audio DTS-HD Master Audio 2ch PCM*2 DTS-HD Master Audio*3 LPCM Multi LPCM Multi LPCM Multi LPCM*1 DVD Dolby Digital Dolby Digital 2ch PCM Dolby Digital DTS DTS 2ch PCM DTS MPEG Multi LPCM Multi LPCM Multi LPCM PCM Multi LPCM Multi LPCM Multi LPCM Audio CD LPCM 2ch PCM 2ch PCM 2ch PCM DTS-CD DTS DTS 2ch PCM DTS AVCHD Dolby Digital Dolby Digital 2ch PCM Dolby Digital LPCM Multi PCM Multi PCM Multi PCM Audio File FLAC/WAV 2ch PCM 2ch PCM 2ch PCM