Changing picture format 1 Press FORMAT on the remote control. For 4:3 video signal [Normal] [16:9] 2 Press О or п to select a picture format and press OK to confi rm your choice. Summary of picture formats [Movie Expand] 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. For 16:9 video signal Normal Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen. [Wide] [Zoom] [Normal] [4:3] 16:9 Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fi ll the screen.
Movie Expand Display a 4:3 picture at a 16:9 size; the picture is stretched more vertically at the top of the screen. This crops out the top of the picture. [Movie Expand] Zoom Display a 4:3 picture at a 16:9 size; at its maximum size that is more vertically stretched to fi ll the screen. This crops out the top and bottom of the picture. [Wide] [Zoom] Wide Display the picture with its center at the original size and the edges stretched horizontally to fi ll the screen. Normal Display a 16:9 picture at its original size. 4:3 Display a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edges of the screen.
For PC input signal through HDMI1 input mode Movie Expand Display a 16:9 picture that is vertically stretched to fi ll the screen. This only crops out the top of the picture. [Normal] [Full] Zoom Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio. Wide Display a horizontally stretched picture. This crops out the left and right sides of the picture. [Dot By Dot] Normal Display a proportionately stretched picture. Sidebars appear on both edges of the screen. Full Display a picture that is stretched out of proportion to fi ll the screen. Dot By Dot Display a picture in its original size . 16 EN