Using your TV as a PC monitor [TV Speakers] This option will allow you to select the audio output from the unit’s speakers. If you connect this TV to an external amplifi er which is compatible with HDMI CEC, you can use volume controls on this TV to control volume on the external amplifi er. Press О or п to select the desired option, then press OK . Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to your TV. For sound, add an audio cable with a stereo mini jack. English Supported screen resolutions The following screen resolutions are supported in PC mode:
Resolution Refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz 1920x 1080 60Hz [Audio Setting] You can set the output mode as a default for the sound mode (NTSC only). This setting is not interlocked when you change the output mode by pressing SAP. (see ‘Switching audio mode’ on page 14). Press О or п to select the desired option, then press OK . Changing sound settings 1 Press MENU on the remote control and select [Sound] . 4 Press MENU to exit. Summary of sound settings Picture Standard Auto Sound The following sound settings can be confi gured. Depending on the sound source, some sound settings are not available. [Auto Sound] :
Sets all sound settings to the factory default. [Equalizer] : Adjusts individual sound frequencies. [Virtual Surround Sound] : This selects sound modes for more spatial or surround sound reproduction. [Auto Volume Leveling] : Reduces sudden changes in volume, for example, during commercials or when switching channels. Select [On] or [Off] . [TV Speakers] : Select [On] or [Off] , or output sound to an EasyLink compliant device. When [Speakers EasyLink] is selected, the TV speakers are disabled and TV sound outputs to the speakers of the compatible EasyLink compliant device. Adjust the volume using the unit’s remote control.
Sound Equalizer Setup Features Virtual Surround Sound Auto Volume Leveling On Off Language TV Speakers Speakers EasyLink USB Audio Setting Stereo 2 Press О or п to highlight a sound setting and press OK to select the setting. 3 Adjust the following items. [Auto Sound] Press О or п to select the desired setting, then press OK . ( [Personal] , [Standard] , [Movie] , [Music] and [News] ) [Equalizer] Adjust tone quality for each frequency. Press Н or Ж to select the specifi c frequency, then press О or п to adjust the level. Changing auto sound mode 1 Press AUTO SOUND to set your TV to a predefi ned sound setting. 2 Press О or п to select one of the following settings: [Personal] :
The customized settings you defi ned by using the [Sound] menu. [Standard] : For normal TV viewing. [Movie] : Realistic sound settings for a cinematic experience. [Music] : Emphasize high and low freq. for instrument sound. [News] : Clear sound settings for human voice. [Virtual Surround Sound] This selects sound modes for more spatial or surround sound reproduction. Press О or п to select the desired option, then press OK . [Auto Volume Leveling] Reduces sudden changes in volume, for example, during commercials or when switching channels. Press О or п to select the desired option, then press OK . EN 17 Caution • Before you connect your PC, set the PC monitor refresh rate to 60Hz.
On The sound will be output from the unit’s speakers. Off The sound will not be output from the unit’s speakers. Speakers EasyLink You can control audio output from your connected EasyLink Compliant Devices with VOL + / − by using this unit’s remote control. Stereo Outputs stereo-audio Mono Outputs mono-audio SAP Outputs second audio program Note • If the TV is connected to a non-EasyLink compliant device and [Speakers EasyLink] is selected, the TV speakers will not be disabled and continue to output sound. On The Virtual Surround Sound will be effective. Off The original sound will be output. On Select if you want to reduce volume differences between the TV commercials and the programs.
Off Select if you want to turn off the Auto Volume Leveling.