• If you have connected your computer to the printer’s parallel port and tried to print a binary-encoded PostScript file it will not print. The parallel port will only accept ASCII- encoded PostScript print files. The front panel will display the message “Error processing job. Flushing rest of job”. Connect your computer to the HP JetDirect Print Server and send the print file again. • The file may be too large for the printer’s memory. This is the case if the front panel displays “Out of memory. Data was lost”. Look on your computer screen for any error message; some drivers allow you to choose a different printing mode—try to resend the file.
• If you continue to have problems, see the “Solutions” section of the User’s Reference Guide . 8 No Output or Slow Output • You may have a power problem. If there is no activity at all from the printer, and nothing on the front panel, check the power button light, that the power cable is connected correctly, and that there is power available at the socket. • If you are using a Macintosh and the print job does not print, ensure the printer language is set to Postscript or Automatic . See the → Graphic Language setting on the front • You may have a problem with your application driver. Is your software configured for this printer? For general advice, see the Setup Poster .
For advice specific to your software, see the documentation supplied with the driver. If the Printer does not Print panel.