Technical Data Sheet Fabric Wash RF 4020 Rev. 3 As an aid to your fabric covering project Air-Tech includes RF 4020 Rev. 3 Fabric Wash with each kit. The Fabric Wash is a solvent alcohol blend which does three things: • When applied before printing it helps ensure the removal of contaminants ie handprints which are not clearly visible. • Using the Fabric Wash will greatly reduce static electricity when spraying primers. This will help reduce the “pickup” of dirt on the sprayed part. • The Fabric Wash acts as a promoter of adhesion of the coatings to the fabric. When applying use a lint free untreated cotton cloth wetted with the Fabric Wash.
Wipe the part to be sprayed no more than 1 hour prior to spraying. Do not saturate the part with Fabric Wash; this is not necessary. Prior to spraying allow the part to dry completely!! Do not spray any coating until the part is completely dry!!! Fabric Wash should be used prior to spraying the primer/filler on the raw fabric. It can also be used prior to spraying the color coat if static electricity is a problem; however, make sure primer is cured before applying Fabric Wash.