Техническая документация AIR Процедура по обшивке (EN)

FABRIC COVERING PROCEDURE MANUAL Manual AT 101 Revision 8 AIR TECH COATINGS 1759 Staton Road • Lonoke, AR 72086 501-985-1484 • www.airtechcoatings.com

Стр. 1

FAA APPROVED FABRIC COVERING PROCEDURE MANUAL MANUAL AT 101 REVISION 8 ORIGINAL ISSUE DATE: SEPT. 19, 1989 COPYRIGHT: JUNE 1, 2015 AIRTECH COATINGS 1759 Staton Road Lonoke, AR. 72086 501- 985-1484 www.airtechcoatings.com

Стр. 2

TABLE OF CONTENTS

FABRIC INSTALLATION MANUAL TABLE OF CONTENTS 1. INTRODUCTION 2. STATEMENT OF WARRANTY 3. SAFETY INFORMATION 4. KIT MATERIAL QUANTITIES 5. METAL PREPARATION 6. PREPARATION OF AIRFRAME 7. FABRIC INSTALLATION 8. PROCEDURE AIR TECH ADHESIVE 9. PROCEDURE TAUTENING FABRIC 10. RIB ATTACHMENTS & ACCESSORIES 11. SURFACE TAPE INSTALLATION 12. PRIMER APPLICATION PROCEDURES 13. PAINT APPLICATION PROCEDURES 14. REPAIR PROCEDURES 15. FAA APPROVALS/COMPLIANCE INFORMATION 16. APPENDIX FABRIC COVERING TIP SHEETS TECHNICAL DATA RF 4020 REV. 3 FABRIC WASH

Стр. 3

INTRODUCTION

Procedure No. AT 101 Rev.7 Original Issue Date: Sept. 19, 1989 Date: February 14, 1994 INTRODUCTION To better serve the covering and coating needs of the aircraft owner Air Tech Coatings, Inc. was created. The advances in materials technology over the last twenty years have yielded improved alternatives to the old “Grade A” and dope systems. These improvements have been the introduction of heat shrinkable polyester fabrics, new adhesives, and new coating systems. They are rapidly becoming the standard for covering and the experience of thousands of aircraft owners who have used them are a great testimony to their ease of application, durability, and finish.

Recovery of any fabric covered aircraft is to be accomplished under the authority of the Federal Aviation Administration (FAA). As with any major repair or alteration it must be inspected and approved by a Representative of the FAA or a delegated authority and the appropriate records made. Specific inquiry should be made if one is in doubt about how to accomplish such a repair. Consult approved Air Tech Manual AT 101, Rev 4 or later approved revision, original aircraft specifications and FAA AC 43.13 – 1A. Pages from the FAA approved Procedure Manual AT 101 are inserted in this manual and are noted FAA approved. Air Tech personnel are eager to assist anyone using the Air Tech System.

Basically, the covering and /or painting processes are simple; but, the achieved are dependent on following the recommendations and having good attention to detail and quality of work. This manual is designed for those having some experience in the application of fabric covering and painting. For those who do not have such experience, Air Tech can refer you to other more comprehensive Publications.

Стр. 4