2. Main Specifications and Differences Between CP1E and CP2E 2.1. Dimensions Although the dimensions of the CP1E and the CP2E are different, the two models are almost identical. *: No 10-point CPU Unit is available for the CP2E. Replace with a CPU Unit with 14 points or more. Dimension comparison table 2.2. Mounting The DIN track and screw hole dimensions are the same as for the CP1E. 100 mm CP1E/CP2E CPU Unit 2.3. Expansion (I/O) Units 8 mm All CP1W Expansion (I/O) Units connectable to the CP1E can be used with the CP2E. 2.4. Option Boards The CP1W-CIF41 cannot be used with the CP2E. If using the CP1W-CIF41 with the CP1E, use the built-in Ethernet port of CP2E-N . 2.5.
Supply Voltage Although the power supply voltage and operating voltage range of the CP1E and CP2E are the same, the power consumption increases depending on the model. Change to an appropriate power supply if power supply capacity is insufficient. 2.6. External Power Supply The external power supply specifications of the CP1E and CP2E are the same. Only 30/40/60-point AC power supply models include an external power supply function. 2.7. I/O Function Assignment All CP1E functions have been covered with the CP2E, with some functions including enhancements. This eliminates the need to implement changes when replacing the models.
6 I/O points Dimensions (W x H x D) CP1E-E CP1E-ES CP2E CP1E-N CP1E-NS(1) Normal-type Renewal-type 10 points 66×90×85 - - 14 points 86×90×85 86×90×79 86×90×80 20 points 86×90×85 86×90×79 86×90×80 30 points 130×90×85 130×90×79 130×90×80 40 points 150×90×85 150×90×79 150×90×80 60 points 195×90×85 195×90×79 195×90×80 I/O points Mounting hole pitch A CP1E CP2E 10 points 56±0.5 - 14 points 76±0.5 76±0.5 20 points 76±0.5 76±0.5 30 points 120±0.5 120±0.5 40 points 140±0.5 140±0.5 60 points 185±0.5 185±0.5