5.4 Wall Bracket Installation Ensure the homeowner has chosen an installation location that allows the charging cable to reach the car's charging port while still providing slack. Ensure there is a stud available at the desired location for mounting he charging station. (See Fig. 5.4.1) Ensure there is WiFi signal available. Fig. 5.4.1 WARNING: In areas with frequent thunderstorms, add surge protection at the service panel for all circuits. Ensure all power and ground connections, especially those at the breaker and bus bar, are clean and tight. Remove all oxide from all conductors and terminals before connecting wiring. 1. Refer to the Fig.
5.4.2 to understand the dimensions of the wall bracket. Please make sure the space on the wall is at least 5.62" Ч 5.98" (143mm Ч 152mm). 143mm Fig. 5.4.2 16 m m