1.2.2 Safety Precautions for Installation Safety gear (helmet, gloves & protective footwear) must be worn when installing the EV charger. Installation must be performed carefully due to the risk of electric shock. The charger must be installed vertically to allow for ventilation. Do not install on surfaces that vibrate or where the device could be at risk of impact. Install in noncombustible areas due to risk of fire. Do not drop any foreign objects, especially metal objects, inside the charger due to a risk of fire. 1.2.3 Safety Precautions for Operation It is strictly forbidden for minors or persons of restricted capacity to be near the charger while in operation. This is to avoid injury.
Forced charging is strictly forbidden when the electric vehicle or charger fails. The electric vehicles can only be charged when the engine is off and the vehicle is stationary. Do not charge in rainy and thunderous weather. Do not use the charger if the charging socket is defective, cracked, worn, or broken. 1.2.4 Safety Precautions for Maintenance Personnel must always wear protective gloves and footwear when performing maintenance work. It is recommended that charger is routinely inspected at least once a week. Do not put flammable, explosive, or combustible materials, chemicals, combustible vapors, or other dangerous goods near the charger, due to risk of fire.
Keep the charging socket clean and dry. Wipe with a clean, dry cloth if soiled. 6