Section 2 - Standards Compliance 2.1 Safety Standard(s) Conforms to IEC 61851-1: 2017, IEC 62196-2 2.2 Charging Mode and Connection According to IEC 61851-1, the Charging mode of PulseQ AC Pro is Mode 3, and charging connection is Case B. Mode 3: A method for the connection of an EV to an AC EV supply equipment permanently connected to an AC supply network, with a control pilot function that extends from the AC EV supply equipment to the EV. Case B: Connection of an EV to a supply network with a cable assemble detachable at both ends. EV Charger Vehicle inlet Type 2 male to Type 2 female cable (not included) Fig. 2-1 7