RIEVTECH STUDIO SOFTWARE MANUAL l On Set the bit address to ON. l Off Set the bit address to OFF. l Inverse It is set a “ Switch ” by which the current state can be conversed. If the current bit address is ON, after it is operated, the bit address will be conversed to OFF. If the current bit address is OFF, after it is operated, the bit address will be conversed to ON. l Reset When it is operated and kept being held, the bit address is set at the ON state all the time. When it is released, the state of the bit address will be immediately switched to OFF. l On Pulse A rising edge pulse is produced which the bit address keeps the pulse “ on ” in a designated time width.
The pulse width range is 0.1~1.5 seconds. 123